Why is your facade losing its shine?

Facades are usually not completely smooth and are exposed to atmospheric influences on a daily basis: rain, humidity, fog, sun, etc. Due to its naturally porous structure, water, dirt, micro-organisms and algae start accumulating in its bumps. And the result? Your facade slowly starts losing its original colour and becomes grey over time. Noticing it most often frustrates us, but don’t forget that this is a completely natural process. All materials age due to physical, chemical and biological processes.

First step: thorough cleaning

First, check the facade for any damage. If there are no large imperfections and cracks, thoroughly clean the facade using high-pressure water to remove accumulated impurities, algae, moss and other deposits that make your facade look dirty and are also deteriorating its structure.

Second step: long-lasting protection with TKK Clean Protect Aquastop Multiuse

Once the surface is clean and completely dry (air-dry), it is time for the crucial step: applying the TKK Clean Protect Aquastop Multiuse hydrophobic impregnation. This advanced silicone impregnation based on an organic solvent is suitable for protecting facades based on inorganic matter (such as silicate or cement-lime facade). The solution creates an invisible protective gloss-free layer which efficiently repels water, prevents the absorption of moisture and inhibits the growth of micro-organisms.

Why should you opt for TKK Clean Protect Aquastop Multiuse?

• Long-term protection of porous inorganic materials such as brick, natural and artificial stone, plaster, concrete, foam concrete, aerated concrete, etc.
• Maintains the natural appearance of your facade, leaving the surface vapour-permeable and allowing it to “breathe”
• Prevents the appearance of algae, mould and lichens
• Reduces heat losses and improves thermal insulation
• Prevents “blooming” due to water-soluble salts

Simple application, rapid effect

Apply the TKK Clean Protect Aquastop Multi-Use with a sprinkler from the bottom up. After application, protect freshly treated surfaces from rain for at least 24 hours, after which they will no longer absorb water.

Hydrophobic impregnations penetrate deeply into the porous surfaces to which they have been applied, which is why they provide for a long-lasting effect, depending on the state of the facade, its absorbency and its exposure.

Help your facade shine – with the right protection!

Don’t allow atmospheric influences to take control of the visual appearance of your home. With TKK Clean Protect Aquastop Multiuse, you will maintain a beautiful facade and extend its useful life in a quick, efficient and long-lasting manner.